Protecting Your Fleet Before Winter: A Tire Flatproofing Checklist

Protecting Your Fleet Before Winter: A Tire Flatproofing Checklist

Winter preparation often starts with batteries, fluids, and starting systems. Tires deserve a place on that list, too.

For off-the-road equipment working through colder months, a flat can mean a service call in freezing conditions, a machine stranded away from the shop, or a delay during an already limited work window. Snow can also conceal debris that would otherwise be easier to spot.

Before winter work gets underway, use this checklist to review your fleet’s tire needs and determine where TyrFil™ flatproofing may help reduce flat-related interruptions.

  1. Review Where Your Equipment Will Be Working

Start with the conditions each machine will face. A loader handling scrap, a skid steer clearing debris, and a telehandler supporting a construction crew may have different tire requirements—even if they operate on the same property.

Identify machines that will encounter sharp debris, rough ground, or locations where field service is difficult. Review past punctures and service calls to see which units have experienced recurring problems.

  1. Plan Flatproofing When Purchasing New Tires

If a machine will need new tires before winter, include flatproofing in the purchasing conversation. Selecting the tires and planning the fill together gives your tire service provider time to prepare the assemblies before the equipment is needed.

Work with your provider to choose tires suited to the machine, its operating conditions, and its winter assignments. The wheels should also be inspected for damage and suitability before installation.

Although flatproofing is normally installed in new tires, a used tire in good condition may also be a candidate following a professional inspection. Flatproofing does not increase a tire’s load capacity or make a damaged casing safe to operate.

  1. Match the Flatproofing Solution to the Application

TyrFil polyurethane tire fill replaces the air inside an off-the-road pneumatic tire with a resilient elastomer core, eliminating flats caused by puncture-related air loss.

Choosing the appropriate formulation requires a review of how the equipment operates. Discuss the machine’s loads, travel speeds, operating hours, terrain, and anticipated temperatures with your TyrFil dealer. Include any change in duties, such as moving a machine from intermittent use to longer winter shifts.

That review helps the dealer evaluate the application and recommend an appropriate TyrFil product.

  1. Coordinate Tire Availability, Flatproofing, and Installation

Allow time for the full process—from obtaining new tires to completing flatproofing and installing the finished assemblies.

Discuss tire availability and service scheduling with your TyrFil dealer before winter assignments begin. Flatproofing requires proper preparation, processing, and curing, so those steps need to be included in the turnaround time.

Cold weather also makes the processing environment important. The required temperature conditions must be maintained during preparation, filling, and curing.

Coordinate with a Carlisle TyrFil Certified Technician to confirm when the completed tire assemblies will be ready for installation and service.

  1. Review Traction and Winter Operating Needs

Eliminating air-loss flats addresses one source of downtime. Your winter tire review should also consider tread condition and suitability for the surfaces the machine will travel.

Discuss snow, ice, slopes, and changing ground conditions with your equipment and tire service providers. Follow manufacturer guidance for tire selection and any traction devices.

Flatproofing does not replace the need for appropriate traction or safe operating practices.

  1. Keep Tire Inspections on the Schedule

TyrFil maintains the tire’s internal operating pressure and provides a consistent ride throughout operation. Routine inspections should focus on tread condition, cuts, casing damage, and wheel condition.

Include machines already equipped with TyrFil in your winter review and continue regular checks throughout the season to identify damage or wear that requires attention.

Your Pre-Winter Tire Checklist

☐ Identify machines with recurring punctures or difficult service access.

☐ Review new tire needs and include flatproofing in the purchasing discussion.

☐ Confirm tire selection and the appropriate TyrFil™ formulation with your dealer.

☐ Coordinate tire availability, flatproofing, curing, and installation before winter assignments begin.

☐ Confirm that tires and any approved traction equipment suit the planned winter work.

☐ Keep routine tire and wheel inspections on the schedule throughout winter.

Prepare Before the Next Cold-Weather Service Call

A winter tire plan starts with knowing which machines are vulnerable to recurring flats, checking their condition, and arranging service before work is interrupted.

Contact your TyrFil dealer to review your fleet’s winter applications and determine where flatproofing can help keep equipment working.